REPABET

Product Sheet

Repabet is a product that is used in the repair of factory floor concretes, road, apron and runway concretes subject to heavy traffic, and shortens the repair and service time.

Concrete Components

In the production of Repabet, raw materials with proven competencies are used according to National and International standards.

Cement:

CEM I or CEM II type cement is produced by OYAK Cement group factories.

Aggregate:

It is obtained from selected sources with appropriate characteristics according to the results of the analysis.

Chemical Additive:

Specially developed new generation super plasticizer and chemical additives that provide early strength are used, which are fully compatible with the cement used.

Setting Time:

Repabet has initial consistency protection and machinability. Setting time can be adjusted. It shows early high compressive and bending strength.

Advantages

Much Higher Early Strength Compared to Standard Concrete

Much Higher Durability Compared to Standard Concrete

Usage areas

Apron and runway repairs,

In concrete road repairs,

In industrial floor repairs,

In all floor repairs that need to be put into use quickly.

Considerations

Concrete should be properly placed in place.

No cold joints should be formed during casting.

Appropriate protection measures should be taken according to the weather conditions after casting.

Concrete should be properly protected against effects such as extreme cold, extreme heat and wind, and every precaution should be taken against the risk of cracking.

Concrete curing and maintenance conditions must be fulfilled.

Projects Used

Atatürk Airport Apron Concrete Repair

REPABET

Human Resources